Axles

 

[FRONTLEFT] BumpTravel=-0.030 // travel to bumpstop with zero packers and zero ride height

ReboundTravel=-0.120 // these two numbers assume front ride height is 30cm to 90cm with 10cm leeway

BumpStopSpring=125000.0 // initial spring rate of bumpstop

BumpStopRisingSpring=1.25e9 // rising spring rate of bumpstop (multiplied by deflection squared)

BumpStopDamper=1050.0 // initial damping rate of bumpstop

BumpStopRisingDamper=2.19e7 // rising damper rate of bumpstop (multiplied by deflection squared)

BumpStage2=0.090 // speed where damper bump moves from slow to fast

ReboundStage2=-0.090 // speed where damper rebound moves from slow to fast

FrictionTorque=9.50 // Newton-meters of friction between spindle and wheel

SpinInertia=1.350 // inertia in pitch direction including any axle

CGOffsetX=0.000 // x-offset from graphical center to physical center (NOT IMPLEMENTED)

PushrodSpindle=(-0.150, -0.150, 0.000) // relative to spindle

PushrodBody=(-0.400, 0.320, 0.000) // spring/damper connection to body (relative to wheel center)

CamberRange=(-4.5, 0.1, 66) <1st=minimum camber in cm, 2nd=# of cm per 'tick', 3rd=# OF 'TICKS'>CamberSetting=15 PressureRange=(120.0, 1.0, 106) <1st=minimum air pressure, 2nd=amount per 'tick', 3rd= # of 'ticks'>PressureSetting=45 PackerRange=(0.000, 0.001, 41)

PackerSetting=0

SpringMult=.49 // take into account suspension motion if spring is not attached to spindle (affects physics but not garage display)

SpringRange=(280000.0, 10000.0, 10)

<1st=minimum spring strength, 2nd=amount per 'tick', 3rd= # of 'ticks'>SpringSetting=0 RideHeightRange=(0.060, 0.005, 8) <1st=Minimum ride height, 2nd=amount per 'tick', 3rd=# of 'ticks' {in meters]>RideHeightSetting=4 DamperMult=.49 // take into account suspension motion if damper is not attached to spindle (affects physics but not garage display)

SlowBumpRange=(4000.0, 300.0, 11)

SlowBumpSetting=2

FastBumpRange=(2000.0, 200.0, 11)

FastBumpSetting=2

SlowReboundRange=(8000.0, 300.0, 16)

SlowReboundSetting=3

FastReboundRange=(4000.0, 300.0, 16)

FastReboundSetting=3

BrakeDiscRange=(0.035, 0.000, 0) // disc thickness

BrakeDiscSetting=0

BrakePadRange=(0, 1, 5) // pad type (not implemented)

BrakePadSetting=2

BrakeDiscInertia=0.001 // inertia per meter of thickness

BrakeOptimumTemp=450.0 // optimum brake temperature in Celsius BrakeFadeRange=450.0 // temperature outside of optimum that brake grip drops to half (too hot or too cold)

BrakeWearRate=1.215e-011 // meters of wear per second at optimum temperature

BrakeFailure=(1.33e-002,7.20e-004) // average and variation in disc thickness at failure

BrakeTorque=3600.0 // maximum brake torque at zero wear and optimum temp

BrakeHeating=0.0005 // heat added linearly with brake torque

BrakeCooling=(1.910e-002,0.667e-004) // minimum brake cooling rate (static and per unit velocity)

BrakeDuctCooling=2.000e-004 // brake cooling rate per brake duct setting

 

[REARLEFT]

BumpTravel=-0.030 // travel to bumpstop with zero packers and zero ride height

ReboundTravel=-0.140 // these two numbers assume rear ride height is 40cm to 100cm with 10cm leeway

BumpStopSpring=125000.0 // initial spring rate of bumpstop

BumpStopRisingSpring=1.25e9 // rising spring rate of bumpstop (multiplied by deflection squared)

BumpStopDamper=1050.0 // initial damping rate of bumpstop

BumpStopRisingDamper=2.19e7 // rising damper rate of bumpstop (multiplied by deflection squared)

BumpStage2=0.090 // speed where damper bump moves from slow to fast

ReboundStage2=-0.090 // speed where damper rebound moves from slow to fast

FrictionTorque=12.50 // Newton-meters of friction between spindle and wheel

SpinInertia=1.727 // inertia in pitch direction including any axle

CGOffsetX=-0.030 // x-offset from graphical center to physical center (NOT IMPLEMENTED)

PushrodSpindle=(-0.200, -0.150, 0.000) // relative to spindle

PushrodBody=(-0.350, 0.320, 0.000) // spring/damper connection to body (relative to wheel center)

CamberRange=(-4.5, 0.1, 66)

CamberSetting=25

PressureRange=(120.0, 1.0, 106)

PressureSetting=50

PackerRange=(0.000, 0.001, 61)

PackerSetting=0

SpringMult=.49 // take into account suspension motion if spring is not attached to spindle (affects physics but not garage display)

SpringRange=(280000.0, 10000.0, 10)

SpringSetting=0

RideHeightRange=(0.070, 0.005, 8)

RideHeightSetting=5

DamperMult=.49 // take into account suspension motion if damper is not attached to spindle (affects physics but not garage display)

SlowBumpRange=(4000.0, 300.0, 11)

SlowBumpSetting=2

FastBumpRange=(2000.0, 200.0, 11)

FastBumpSetting=2

SlowReboundRange=(8000.0, 300.0, 16)

SlowReboundSetting=8

FastReboundRange=(4000.0, 300.0, 16)

FastReboundSetting=8

BrakeDiscRange=(0.032, 0.000, 0) // disc thickness

BrakeDiscSetting=0

BrakePadRange=(0, 1, 5) // pad type (not implemented)

BrakePadSetting=2

BrakeDiscInertia=0.001 // inertia per meter of thickness

BrakeOptimumTemp=450.0 // optimum brake temperature in Celsius (peak brake grip)

BrakeFadeRange=450.0 // temperature outside of optimum that brake grip drops to half (too hot or too cold)

BrakeWearRate=1.215e-011 // meters of wear per second at optimum temperature

BrakeFailure=(1.33e-002,7.20e-004) // average and variation in disc thickness at failure

BrakeTorque=3300.0 // maximum brake torque at zero wear and optimum temp

BrakeHeating=0.0005 // heat added linearly with brake torque

BrakeCooling=(1.700e-002,0.400e-004) // minimum brake cooling rate (static and per unit velocity)

BrakeDuctCooling=1.200e-004 // brake cooling rate per brake duct setting